Building From Source¶
In addition to meeting the system requirements, there are three things you need to build Routinator: rsync, a C toolchain and Rust. You can run Routinator on any operating system and CPU architecture where you can fulfil these requirements.
To get started you need rsync because some RPKI repositories still use it as its main means of distribution. Some of the cryptographic primitives used by Routinator require a C toolchain. Lastly, you need Rust because that’s the programming language that Routinator has been written in.
Currently, Routinator requires the rsync executable to be in your path. Due to the nature of rsync, it is unclear which particular version you need at the very least, but whatever is being shipped with current Linux and *BSD distributions, as well as macOS should be fine. Alternatively, you can download rsync from the Samba website.
On Windows, Routinator requires the rsync version that comes with Cygwin – make sure to select rsync during the installation phase.
Some of the libraries Routinator depends on require a C toolchain to be present. Your system probably has some easy way to install the minimum set of packages to build from C sources. For example, this command will install everything you need on Debian/Ubuntu:
apt install build-essential
If you are unsure, try to run cc on a command line. If there is a complaint about missing input files, you are probably good to go.
The Rust compiler runs on, and compiles to, a great number of platforms, though not all of them are equally supported. The official Rust Platform Support page provides an overview of the various support levels.
While some system distributions include Rust as system packages, Routinator relies on a relatively new version of Rust, currently 1.70 or newer. We therefore suggest to use the canonical Rust installation via a tool called rustup.
Assuming you already have curl installed, you can install rustup and Rust by simply entering:
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
Alternatively, visit the Rust website for other installation methods.
Building and Updating¶
In Rust, a library or executable program such as Routinator is called a crate. Crates are published on crates.io, the Rust package registry. Cargo is the Rust package manager. It is a tool that allows Rust packages to declare their various dependencies and ensure that you’ll always get a repeatable build.
Cargo fetches and builds Routinator’s dependencies into an executable binary for your platform. By default you install from crates.io, but you can for example also install from a specific Git URL, as explained below.
Installing the latest Routinator release from crates.io is as simple as running:
cargo install --locked routinator
The command will build Routinator and install it in the same directory that
Cargo itself lives in, likely
$HOME/.cargo/bin. This means Routinator
will be in your path, too.
If you want to update to the latest version of Routinator, it’s recommended to update Rust itself as well, using:
--force option to overwrite an existing version with the latest
cargo install --locked --force routinator
Installing Specific Versions¶
If you want to install a specific version of
Routinator using Cargo, explicitly use the
--version option. If needed,
--force option to overwrite an existing version:
cargo install --locked --force routinator --version 0.9.0-rc2
All new features of Routinator are built on a branch and merged via a pull
request, allowing you to
easily try them out using Cargo. If you want to try a specific branch from
the repository you can use the
cargo install --git https://github.com/NLnetLabs/routinator.git --branch main
For more installation options refer to the Cargo book.
Enabling or Disabling Features¶
When you build Routinator, “features” provide a
mechanism to express conditional compilation and optional dependencies. The
Routinator package defines a set of named features in the
table of Cargo.toml. The table
also defines if a feature is enabled or disabled by default.
Routinator currently has the following features:
socks— Enabled by default
Allow the configuration of a SOCKS proxy.
ui— Enabled by default
native-tls— Disabled by default
Use the native TLS implementation of your system instead of rustls.
rta— Disabled by default
Let Routinator validate Resource Tagged Attestations.
aspa— Disabled by default
Let Routinator validate ASPA objects.
ASPA support is temporarily behind a feature flag while the draft is under discussion in the IETF. This way operators can gain operational experience without unintended side effects.
To disable the features that are enabled by default, use the
--no-default-features option. You can then choose which features you want
--features option, listing each feature separated by commas.
For example, if you want to build Routinator without the user interface, make sure SOCKS support is retained and use the native TLS implementation, enter the following command:
cargo install --locked --no-default-features --features socks,native-tls routinator
Platform Specific Instructions¶
GÉANT has created an Ansible playbook defining a role to deploy Routinator on Ubuntu.
For some platforms, rustup cannot provide binary releases to install directly. The Rust Platform Support page lists several platforms where official binary releases are not available, but Rust is still guaranteed to build. For these platforms, automated tests are not run so it’s not guaranteed to produce a working build, but they often work to quite a good degree.
On OpenBSD, patches are required to get Rust running correctly, but these are well maintained and offer the latest version of Rust quite quickly.
Rust can be installed on OpenBSD by running:
The standard installation method does not work when using CentOS 6. Here, you will end up with a long list of error messages about missing assembler instructions. This is because the assembler shipped with CentOS 6 is too old.
sudo yum install centos-release-scl sudo yum install devtoolset-6 scl enable devtoolset-6 bash curl https://sh.rustup.rs -sSf | sh source $HOME/.cargo/env
SELinux using CentOS 7¶
This guide, contributed by Rich Compton, describes how to run Routinator on Security Enhanced Linux (SELinux) using CentOS 7.
Start by setting the hostname:
Set the interface and connect it:
Ensure that “Automatically connect” and “Available to all users” are checked.
Install the required packages:
sudo yum check-update sudo yum upgrade -y sudo yum install -y epel-release sudo yum install -y vim wget curl net-tools lsof bash-completion yum-utils \ htop nginx httpd-tools tcpdump rust cargo rsync policycoreutils-python
Set the timezone to UTC:
sudo timedatectl set-timezone UTC
Remove postfix as it is unneeded:
sudo systemctl stop postfix sudo systemctl disable postfix
Create a self-signed certificate for NGINX:
sudo mkdir /etc/ssl/private sudo chmod 700 /etc/ssl/private sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \ -keyout /etc/ssl/private/nginx-selfsigned.key \ -out /etc/ssl/certs/nginx-selfsigned.crt # Populate the relevant information to generate a self signed certificate sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 2048
Add in the
/etc/nginx/conf.d/ssl.confand edit the
ssl.conffile to provide the IP of the host in the
Set the username and password for the web interface authentication:
sudo htpasswd -c /etc/nginx/.htpasswd <username>
Start Nginx and set it up so it starts at boot:
sudo systemctl start nginx sudo systemctl enable nginx
Add the user routinator, create the
/opt/routinatordirectory and assign it to the routinator user and group:
sudo useradd routinator sudo mkdir /opt/routinator sudo chown routinator:routinator /opt/routinator
Sudo into the routinator user:
sudo su - routinator
Install Routinator and add it to the
$PATHfor user routinator:
cargo install --locked routinator vi /home/routinator/.bash_profile Edit the PATH line to include "/home/routinator/.cargo/bin" PATH=$PATH:$HOME/.local/bin:$HOME/bin:/home/routinator/.cargo/bin
Create a routinator systemd script using the template below:
sudo vi /etc/systemd/system/routinator.service [Unit] Description=Routinator RPKI Validator and RTR Server After=network.target [Service] Type=simple User=routinator Group=routinator Restart=on-failure RestartSec=90 ExecStart=/home/routinator/.cargo/bin/routinator -v -b /opt/routinator server \ --http 127.0.0.1:8080 --rtr <IPv4 IP>:8323 --rtr [<IPv6 IP>]:8323 TimeoutStartSec=0 [Install] WantedBy=default.target
You must populate the IPv4 and IPv6 addresses. In addition, the IPv6 address needs to have brackets ‘[ ]’ around it. For example:
/home/routinator/.cargo/bin/routinator -v -b /opt/routinator server \ --http 127.0.0.1:8080 --rtr 172.16.47.235:8323 --rtr [2001:db8::43]:8323
Configure SELinux to allow connections to localhost and to allow rsync to write to the
sudo setsebool -P httpd_can_network_connect 1 sudo semanage permissive -a rsync_t
Reload the systemd daemon and set the routinator service to start at boot:
sudo systemctl daemon-reload sudo systemctl enable routinator.service sudo systemctl start routinator.service
Set up the firewall to permit ssh, HTTPS and port 8323 for the RTR protocol:
sudo firewall-cmd --permanent --remove-service=ssh --zone=public sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv4" \ source address="<IPv4 management subnet>" service name=ssh accept' sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv6" \ source address="<IPv6 management subnet>" service name=ssh accept' sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv4" \ source address="<IPv4 management subnet>" service name=https accept' sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv6" \ source address="<IPv6 management subnet>" service name=https accept' sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv4" \ source address="<peering router IPv4 loopback subnet>" port port=8323 protocol=tcp accept' sudo firewall-cmd --permanent --zone public --add-rich-rule='rule family="ipv6" \ source address="<peering router IPv6 loopback subnet>" port port=8323 protocol=tcp accept' sudo firewall-cmd --reload
https://<IP-address>/metricsto see if it’s working. You should authenticate with the username and password that you provided in step 10 of setting up the RPKI Validation Server.